How to Adjust Height Adjustment Cable

If you are adjusting the height adjustment cable, you are experiencing an issue with the cart's ability to lock at the height you desire. Follow the steps below to properly adjust the cable.

1. Locate the paddle handle for the cart. Where the paddle handle meets the height adjustment cable, there is a barrel nut (longer, smooth nut) and a serrated nut (short, grooved nut). The barrel nut and the serrated nut control the locking ability for the height adjustment. If the height adjustment will not unlock from its position, go to step 2. If the height adjustment does not lock and it moves freely, go to step 3.
2. IF THE HEIGHT ADJUSTMENT WILL NOT UNLOCK, rotate the barrel nut so more thread is exposed. Next, rotate the serrated nut to lock the barrel nut into place. Continue to do this until the cart will unlock when the paddle handle is pressed.
3. IF THE HEIGHT ADJUSTMENT WILL NOT LOCK, rotate the serrated nut so less thread is exposed. Next, rotate the barrel nut towards the serrated nut so the barrel nut is locked into place. Continue to do this until the cart will lock when the paddle handle is released.

Figure 1. Height adjustment cable with no thread shown.	Figure 2. Height adjustment cable with some thread shown.