Follow the attachment below to properly install a CW.
Tools Required:
5/32” Allen Wrench
Parts Included:
(1) Counterweight Plate
(4) ¼-20 x 1” Button Head Cap Screws
(4) ¼” Flat Washers
1. Align the counterweight plate to the specified holes on the underside of the base. The flat portion of the plate should be facing upward.
2. Using the 5/32” Allen wrench, secure the counterweight plate to the underside of the base using the 4 ¼” flat washers and the 4 ¼-20 x 1” button head cap screws
Figure 1. The counterweight being attached to the underside of the base.
If you have any questions, contact Altus at service@altus-inc.com or (616) 233-9530. If immediate assistance is needed, please call as soon as possible so we may help.
Comments
0 comments
Please sign in to leave a comment.