Follow the attachment below to properly install an HFH.
Tools required:
#2 Phillips Drive Screw driver or #2 Square bit drive
Parts Included:
(1) Hanging File Folder
(2) Sets of Mounting Bracket Assemblies
(4) 10-24 x 7/8” Long Phillips Drive Pan Head Machine Screws
(4) 10-24 x 1” Long Phillips Drive Pan Head Machine Screws
For Cart Column Installation:
1. Measuring up 2 “ from the top of the hub, attach 1 set of Accessory Mounting Brackets using (2) 10-24 x 1” Long Phillips Drive Machine Screws.
2. Attach second set of Accessory Mounting Brackets above first set. The height of second set is determined by the hole pattern in Hanging File Holder.
3. Slip the HFH (Hanging File Holder) accessory onto the lower accessory mounting bracket thru the keyhole slots.
4. Attach HFH (Hanging File Holder) accessory securely at the top with the (2) screws provided.
For Wall-Mount Column Installation:
1. Measuring up 2 “ from the top of the hub, attach 1 set of Accessory Mounting Brackets using (2) 10-24 x 1” Long Phillips Drive Machine Screws.
2. Attach second set of Accessory Mounting Brackets above first set. The height of second set is determined by the hole pattern in Hanging File Holder.
3. Slip the HFH (Hanging File Holder) accessory onto the lower accessory mounting bracket thru the keyhole slots
4. Attach HFH (Hanging File Holder) accessory securely at the top with the (2) screws provided.
Comments
0 comments
Please sign in to leave a comment.