BCH7 Installation Instructions

Follow the attachment below to properly install a BCH7.

Tools Required: Phillips Head Screwdriver

Parts Included:
(4) #10-24 x 1 ¼” Flat Head Phillips Drive Screw (1) Barcode Holder

1. Align the barcode holder (provided) to the specified 4 specified hole placements beneath the work surface (see figure A). Position and rotate the barcode holder so the 4 screws
(provided) can secure the barcode holder to the underside of the work surface.

Figure A

If you have any questions, contact Altus at service@altus-inc.com or (616) 233-9530. If immediate assistance is needed, please call as soon as possible so we may help.